Description
KEY FEATURES
- For Videographers, Journalists, Vloggers
- Omni Lavalier Mic & Built-In Omni Mic
- Ultracompact Clip-On Pro Transmitter
- Ultracompact 2-Channel Plug-In Receiver
- Lightning Connector for iOS Devices
- Easy to Use, Informative OLED Screens
- Mute Function, Mono/Stereo Output Mode
- TX: Internal 8-Hr Battery, Charging Case
- RX: Bus Powered, Dedicated Headphone Out
- 18 Systems at Once Max, up to 328′ Range
DESCRIPTION
Merging the ultracompact and extraordinarily easy-to-use nature of the standard Blink 500 with high-end luxuries such as crisp OLED screens, mono/stereo output modes, 60% longer battery life, and double the operating range, theSaramonic Blink 500 Pro B3true wireless microphone system gives budget-conscious content creators, run-and-gun videographers, and mobile journalists a pro-level, all-inclusive solution for recording one subject to an iPhone or iPad equipped with a Lightning port.
Not only does the Blink 500 Pro B3 deliver considerably improved sound quality compared to the built-in mics on cameras and mobile devices, but it elevates the sound quality of the original Blink 500 with its higher signal-to-noise ratio and more sensitive integrated microphone. Plus, the Pro transmitter now sports a tactile function for immediate mute/unmute operations without having to touch the volume, and the receiver boasts a dedicated headphone output to allow real-time audio monitoring without breaking the connection to your recording device.
The Blink 500 Pro B3 digital system provides out-of-the-box operability for anyone; thanks to quick one-click pairing and the transmitter’s internal 8-hour battery, your focus can stay on your content instead of time-consuming configuration. Power the transmitter with its internal battery or through USB for extra-long shoots. Recharging the battery can be done via USB or by simply dropping the transmitter into the supplied fast-charging case. The receiver is bus powered, so it never needs to be charged.
Equally straightforward, small, and versatile, the Blink 500 Pro B3 gives you everything necessary for recording present and clear speech in any location. You get a clip-on transmitter with a built-in microphone and a clip-on omni lavalier mic, a dual-channel receiver that plugs directly in your mobile device, charging cables, foam and furry windscreens, and that special charging case. Whether you’re a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 500 Pro B3 can get your wireless audio going pro in no time.
SPECIFICATIONS
| Transmitter Specifications | Reception Type: 2.4GHz Digital Frequency RF Frequency Band: 2400 to 2483.5 MHz Modulation: Gaussian Frequency-Shift Keying (GFSK) Operating Range: Up to 328′ (100m) RF Output Power: 10mW Built-in Microphone Polar Pattern: Omnidirectional Frequency Response 50Hz to 18KHz Built-in Microphone Maximum SPL: 120dB Built-in Microphone Sensitivity: -39dB Lavalier Microphone Maximum SPL: 110dB Lavalier Microphone Sensitivity: -39dB Reference Audio Input Level: -30~-42dBv MIC input, 0dB Attenuation Input Connector: 3.5mm Mic In / Line In (Mic with Plug-in-Power) Digital Signal Resolution: 24bit / 44.1kHz Signal-to-Noise Ratio: 78dB |
| SR-M1 Lavalier Specifications | Acoustic Principle: Electric Condenser Polar Pattern: Omnidirectional Connector: 3.5mm Cable Length: 4.1 (1.25m) Maximum SPL: 110dB Sensitivity: -39dB+/-2dB(0dB=1V/Pa,1kHz) Signal-to-Noise Ratio: 60dB THD: <1% (94dB SPL at 1kHz) Power Requirements: Plug-in-Power (1V10V) Standard Operating Voltage: 3V Current Consumption: <500A Output Impedance: <2.2K |
| Receiver Specifications | Reception Type: 2.4GHz Digital Frequency RF Frequency Band: 2400 to 2483.5 MHz Modulation: Gaussian Frequency-Shift Keying (GFSK) Operating Range: Up to 328′ (100m) Digital Output Connector: MFi Certified Lightning Male Connector Output Mode Types: Mono / Stereo Digital Signal Resolution: 16bit / 48kHz Signal-to-Noise Ratio: 78dB Voice Delay: 6ms Distortion: 0.1% Headphone Output Connector: 3.5mm Power Requirements: Powered by iOS Device Antenna: PIFA Antenna Weight: 0.58oz (16.4g) Dimensions: 1.22 x 3.23 x 0.47 (31 x 82 x 12mm) |
| Blink 500 Pro B3 Charging Case Specifications | Power Requirements: Powered by USB-C port to USB-A Charger (5V/1.5A) Power Capacity: 2000mAh Box’s Charging Time: 3-hours Weight: 7.05oz (200g) Dimensions: 4.84 x 4.02 x 1.56 (123 x 102 39.7mm) |
Reviews
There are no reviews yet.